Hot selling multi-used thermocouple,liquid metal temperature
Thermocouple Tip 10%(TYPE S)/13%(TYPE ) with paper tube length of
150 to 1500mm as required according to furnace capacity.
usage:Can be used 8-10 times in slag free condition and avoids
spurting and splashing.
Safetip is used especially for foundry and steel plants
Method of Use
1.According to the measured object and range, selecting the
appropriate protection tube length and suitable temperature
2.Put the fast thermocouple on the temperature measuring gun, and
the secondary instrument pointer (or digital) back to zero, this
shows contacts good, can be measured.
3.Fast thermocouple insertion depth of the molten steel with
300-400 - mm, don't test to furnace wall or dreg ,do fast, steady,
accurate, when secondary instrument to get the results, should
immediately carry guns, fast thermocouple immersion time in molten
steel must not exceed 5 seconds, otherwise easy to burn temperature
4,Raised temperature measuring gun from the furnace, take the used
thermocouple down, and install a new one, pause for a few minutes,
prepare the next measurement. Don't even measure even split,
otherwise cause temperature fluctuations.